This 2016 Mineral White Metallic 3 series BMW is stunning with a fresh application of Opti-Coat Pro+.
Starting off with an eco-friendly “Optimum No Rinse” wash, we are able to clean all panels of dirt and debris.
This is then followed by a full paint decontamination to rid the clear coat of all embedded contaminants using a “clay bar” or Ferrex (iron remover).
Even being a brand new or barley used car, most vehicles are often brought in on big carrier ships, or by train. Being stored in these ship and rail yards, result in a fair amount of contaminants being embedded in your factory clear coat.
Once the clear coat is cleaned, using Optimum Polymer Technologies full line of Detail and Paint reconditioning products, we start to bring the look and feel of the vehicle’s paint to its full potential. At OCD we do a minimum of a 2 step Compound & Polish on every vehicle before applying any coatings for the best look and coating performance.
Bringing the paint up to the desired level of quality, we now prep the paint for coating application, using OPT’s Paint Prep we remove all waxes, grease, and dust ensuring the best possible cross link of factory clear coat and Opti-coat Pro Coatings.
There is a cure time of seven days that the coating must go with out chemicals touching the freshly coated surface. By applying Optimum’s spray sealant “Opti Seal” to every coated vehicle we can help protect the new coating in its curing phase.
OCD gives a free Optimum No Rinse wash to every new coating job we do, as soon as the seven days after applying coatings.
We will demonstrate how to wash and take care of your new coating to stay within your coatings warranty.
With the Opti Coat Pro+ coating, this happy customers car will be protected from the elements with Optimums 7 year warranty!